Swing Hammer Mill

Particularly suitable for: Chemicals, Resins, Grain, Clay, Seaweed, Fruit (Dried), Wheat, Barley/Oats, Domestic waste, Glass

Operating Principle
Material is fed into the inlet hopper where it falls into the grinding chamber. It is then ground by the action of freely rotating hardened steel hammers against a serrated face. The ground material then passes through a mild steel screen and into a receptacle.

CONSTRUCTION
Durable mill body constructed from cast iron with carbon steel inlet hopper and hardened steel hammers.  Mounted on heavy steel motor rails complete with belt drive, guard, and starter.Hammers have four grinding edges which can be rotated in turn to give maximum life.

Inside the Hammer Mill (Model SHM10) showing the easy access to the swing hammers and screen.

STANDARD BOTTOM DISCHARGE MODELS 
Supplied with screen of your choice, discharge sock, receptacle and wheels.

SHM10
Recommended operating speed - 3650 rpm
Power - 2.2kW
Approx throughput depending on material & screen size - 1000Kg/h
Motor Voltage - 400V/3ph/50Hz

SHM20
Recommended operating speed - 3650 rpm
Power - 4kW
Approx throughput depending on material & screen size -2000Kg/h
Motor Voltage - 400V/3ph/50Hz

SHM30
Recommended operating speed - 3650 rpm
Power - 7.5kW
Approx throughput depending on material & screen size -5000Kg/h
Motor Voltage - 400V/3ph/50Hz

• Maximum Feed Size: 50mm Final Particle Size: down to 400 microns (depending on material).
• Throughput From batches of a few Kg up to 5,000Kg/h (depending on material).
• Dimensions 750W x 800D x 1530mmH Gross weight: 185 Kg

All figures given are approximate

Blower discharge models are also available and come with a powerful fan which pulls the material into the grinding chamber and through the screen. These are primarily used for efficient discharge of lighter weight particles such as plastic, foam etc, and possibly for applications where the processed material is distributed to another processing area or level.

Both the Bottom discharge and Blower Discharge models can be supplied on a steel baseplate for customer installation over a collecting vessel or pit conveyor.